36″ Tabletop Retractable

36" Tabletop Retractable

This display stands 36″ wide x 54.75″  tall.
It compacts to 38″ x 4.5″ x 4.5″ in its carry case



36" Tabletop Retractable


An easy to set up, sturdy display just swivel the feet out, put in the poles, pull up the banner and hook it to the top and you are done. This has a nice solid presence and will not take up a lot of room on your display table. Printed on a fully recyclable, high quality PET substrait with high quality printing. We finish with a matte laminate for a display that will last years.


We specialize in providing custom, high quality banners and displays at reduced prices.

If you would like to design your own graphics, please visit our Graphic Guidelines. To download a template, please visit our templates tab. You may send us notes, elements or finished files using our upload page. After we receive your files, we will check over the files before working on your order. If you would prefer we create a custom design for you, our design rate is charged at $20 per hour.

Shipping: We don’t charge a product until it ships, so we would add the cost of shipping right before we ship.


Printed Banner


• Printed total size with bleed 35.6″ x 54.7″
• Visible area when displayed 35.6″ x 51.25″
• In the display the final product stands 55.75″ tall


• Full color print on a non-curl block out grey-back, fully recyclable, PET film.
• Finished with Cold laminate to protect the print.
• Corners finished with Power Tabs (cleaner look and stronger than grommets)

Deluxe Retractable Mechanism:

(1) Oxford cloth Carry Case with padded nylon insert
(1) 3-section aluminum pole
(1) Aluminum top rail
(2) Allen wrench to secure the retractable mechanism in travel


• With banner retracted and feet folded: 36″ wide x 3.5″ deep x 3.5″ tall
• With cross piece feet swiveled out, the feet extend 6″ in the front, 6″ in the back. Total depth when opened 15″
• Opened, with print banner: 52″ tall from the floor


• Case of brushed Aluminum
• Retractable mechanism inside
• Polypropylene film leader to attach your banner this attaches with a sticky strip and reinforced with plastic tape.
• Brushed aluminum cross piece pivots in for storage and pivots out for extra stability.
• 2-section aluminum pole (For Tabletop displays, we cut the elastic rope to separate the poles. 3 poles come with the display. We will give you the extra pole in case you ever want to put a full size banner in your stand.)
• Top-rail is aluminum with gray plastic end caps. It friction clamps on to the banner. The plastic end caps hold it closed.

Soft Carrying Case:

• 38″ x 4.5″ x 4.5″
• Oxford Cloth with both an adjustable over the shoulder nylon carrying strap and a nylon hand grip on one end.
• Zips shut with nylon zipper.


On the retractable banner templates there is a bleed area on the top and bottom, please extend your design INTO the bleed areas. This won’t show in the final product but gives a smooth transition with no risk of a hard line. The top bleed area is for the top rail and the bottom winds down into the stand.

Keep fonts and critical objects out of the bleed areas.

If you are using a different version of Illustrator you will need to delete the clipping mask.

Product Files
36″ Tabletop Retractable Banner (35.6″ x 54.7″) 300ppi (You can reduce to 150ppi if your files get too large) (Photoshop
Illustrator & PNG files)

You can use these templates to send us your concepts or you can do the design yourself. If you do that please see our Graphic Guidelines on how to best put your designs together and save them for us to print.

• The templates will contain the correct resolution. Generally, files should be kept around 300 dpi. Large display designs can be 150-200 dpi to keep the file size manageable.

• We have templates for Photoshop and Illustrator. For all other design software please use the JPG or PNG templates.

• If you need a custom template please contact us at gsorders@techteam.org

We prefer you to submit designs with layers intact. This makes it much easier to do color adjustments so your print comes out looking good. Please be sure and turn your fonts to outlines or rasterize them.

If you do submit in a flattened file please be sure to hide the “DO NOT PRINT” template layer.If you want to save to a png or jpg please include the bottom red line (found on all archetype header templates).

If your file is very large consider zipping it before you send it. To send files please click here.

These file types work well for layers: PSD, PDF, EPS, SVG, AI, AIT, INDD, INDT.

You can also send:JPG and PNG

Please save JPGs at the maximum size. For PNG save fast and uncompressed.

Get INvolved and help make an impact on the world. TECH Team focuses on helping missions and churches spread the gospel and build the body of Christ more effectively.


We have the solutions you can afford!

File Upload

For ease of uploading you can zip all of your files into one folder. (Select your files, right click and select ‘compress’ or ‘zip’) Each upload has a 2 GB limit. Be sure and tell us in the message line who the file is for. Do not close the page until the file upload is complete.

See our Template Page to download Templates if you wish to create your own design
(Please see our Graphic Guidelines for how to prepare your files and how to Zip files.)

Upload elements for your design OR upload your finished design.

If you have any questions please contact us at
gsorders@techteam.org or call us at 903-757-4530

Login / Logout

If you have any questions please contact us at
gsorders@techteam.org or call us at 903-757-4530

Quick Donation

TECH Team relies on donations and sponsorships for funds in order to continue providing professional and affordable services specific to the needs of like-minded missionaries, churches, and Christian organizations around the world.